shopify analytics ecommerce

In-Wall / In-Ceiling

StingRay 8

Stealth’s StingRay 8 environmental outdoor speaker is completely hermetically sealed and fully immune to the elements, including rain, snow, ice or particulates. There are no grills, no openings, allowing it to even operate underwater.  The StingRay 8 and has an Ingress Protection rating (IEC IP rating) of IP-68, meaning it exceeds the top standard IP rating (IP-67) and has been certified for a minimum of 64 hours underwater at 1 meter depth.  Its no wonder that the StingRay has become a key audio system speaker in some of the worlds most impressive Yachts.

StingRay is an 8” 2-way speaker using a hybrid of traditional and cutting-edge speaker technologies. The internal drivers are an 8” high-power cone woofer and a 30mm 25W neodymium directly coupled tweeter.  Together, they energize the speaker’s unique FidelityGlasstm solid-front radiating surface to create a surprising bass response and a smooth hi-frequency output.

StingRay 6

The StingRay 6 is the smallest member of the Stingray Family. At only 15” wide and less than 4” in depth the StingRay 6 provides warm natural bass and mids with crisp highs for a broad coverage pattern.

Like the larger StingRay 8, the Stingray 6 utilizes Stealth’s proprietary FidelityGlasstm solid-front radiating surface, which ensures the StingRay’s internal components are fully isolated from any intrusion of dust or moisture.  The StingRay has an unprecedented environmental protection rating of IP-68 as measured to IEC standards.   StingRay is rated to be fully operable underwater for up to 64 hours at 1M depth and can withstand rain, snow, sleet, hail, sun and dust in temperatures ranging from 0 – 150 degrees F.

ECS-SS82 Edgeless SweetSpot In-Ceiling Speaker

Frameless design for reduced visibility/seamless blend

Up to 20° angled SweetSpot

Echo control R435 sound absorbing material

Easy adjust Bass/Treble trim

Easy install Turn-N-Lock™ installation mechanisms

Perfect for all sub applications

Easy install magnetically attached & paintable speaker grilles

Elaborate crossover networks with gold plated & spring loaded speaker terminals

Silk dome 1″ swiveling neodymium tweeter

High quality and precision polypropylene woofer with wide rubber surround for extended bass response and more piston

EWSLA63 Edgeless Line Array In-Wall LCR Speaker

Six 3-inch low mass poly cone midbass

1″ (25mm) silk dome NEO swiveling tweeter

Elaborate crossover networks

Stiff aluminum body

Resonance free

Easy install “Turn-N-Lock™” mechanism

Frameless design for reduced visibility/seamless blend

Gold plated spring loaded terminals

Magnetically attached, versatile, paintable grilles

SS82W SweetSpot

Up to 20° angled SweetSpot

Echo control R435 sound absorbing material

Easy adjust Bass/Treble trim

Easy install Turn-N-Lock™ installation mechanisms

Perfect for all sub applications

Easy install magnetically attached speaker grilles

Elaborate crossover networks with gold plated & spring loaded speaker terminals

Silk dome 1″ swiveling neodymium tweeter

High quality and precision polypropylene woofer with wide rubber surround for extended bass response and more piston

ACS3.0 Architectural Ceiling Speaker

The ACS3.0 is a full range in-ceiling speaker designed to produce audiophile quality sound and occupy a very compact space (2 9/16″ x 2 15/16″). The self-enclosed ACS3.0 ultra-compact speaker is an ideal choice for background music. It can effortlessly produce full range music without strain.

With its resemblance to a ceiling recessed spot light, paintable grille and frame, the ACS3.0 can invisibly blend to its surrounding. Whether you want background/ambient music or practical enhancement to your surround sound, the ACS3.0 Architectural Ceiling Speaker is the ideal speaker for the job.

THOR In-Wall Subwoofer

Bolt in stud mounting
16″ Center to Center positioning
24″ Center to Center positioning
Exclusive patented 10″ SWS subwoofer
Patented SLAPS passive radiator system
Less than 4″ mounting depth
Resilient fire retardant back box
Complete with three (3) custom grilles: standard paintable metal mesh grille, standard paintable cloth grille and blank plastic grille frame

SweetSpot

Up to 20° angled SweetSpot
Echo control R435 sound absorbing material
Easy adjust Bass/Treble trim
Easy install Turn-N-Lock™ installation mechanisms
Perfect for all sub applications
Easy install magnetically attached speaker grilles
Elaborate crossover networks with gold plated & spring loaded speaker terminals
Silk dome 1″ swiveling neodymium tweeter
High quality and precision polypropylene woofer with wide rubber surround for extended bass response and more piston

RCS-800

1-inch silk dome swivel NEO tweeter
Bumped back basket for high speaker excursion
Wider surround for deeper bass and higher speaker excursion
12 dB/Octave filter network crossover
Thermal tweeter protection
Custom compact spring loaded terminals
Easy to use Turn ‘N’ Lock installation mechanism
20% trimmer speaker frame for to reduce visibility
Paintable rust-resistant grille
Also available in 5.25″ and 6.5″ models

RCS-650

1-inch silk dome swivel NEO tweeter
Bumped back basket for high speaker excursion
Wider surround for deeper bass and higher speaker excursion
12 dB/Octave filter network crossover
Thermal tweeter protection
Custom compact spring loaded terminals
Easy to use Turn ‘N’ Lock installation mechanism
20% trimmer speaker frame for to reduce visibility
Paintable rust-resistant grille
Also available in 5.25″ and 8″ models

RCS-500

1-inch silk dome swivel NEO tweeter
Bumped back basket for high speaker excursion
Wider surround for deeper bass and higher speaker excursion
12 dB/Octave filter network crossover
Thermal tweeter protection
Custom compact spring loaded terminals
Easy to use Turn ‘N’ Lock installation mechanism
20% trimmer speaker frame for to reduce visibility
Paintable rust-resistant grille
Also available in 6.5″ and 8″ models

IQ CM8S In-Ceiling Speakers

Singles have +/- 3dB tweeter control
Duals have +/- 3dB tweeter and woofer controls
Gold plated spring loaded terminals
Aluminum electroplated glass fiber cones
3/4″ neodymium magnet dome tweeter with “On-Axis” 180° positioning for better staging and imaging
High roll surround / long excursion
Easy install “Turn-N-Lock™” mechanism
Easy connect spring loaded binding posts
Poly switch for tweeter protection
Hung butyl surround
250-Volt mylar caps
Elaborate filter network: High pass 12dB/Oct @ 2kHz
Low pass 12dB/Oct @ 2kHz

IQ CM8Dual In-Ceiling Speakers

Singles have +/- 3dB tweeter control
Duals have +/- 3dB tweeter and woofer controls
Gold plated spring loaded terminals
Aluminum electroplated glass fiber cones
3/4″ neodymium magnet dome tweeter with “On-Axis” 180° positioning for better staging and imaging
High roll surround / long excursion
Easy install “Turn-N-Lock™” mechanism
Easy connect spring loaded binding posts
Poly switch for tweeter protection
Hung butyl surround
250-Volt mylar caps
Elaborate filter network: High pass 12dB/Oct @ 2kHz
Low pass 12dB/Oct @ 2kHz

IQ CM6S In-Ceiling Speakers

Singles have +/- 3dB tweeter control
Duals have +/- 3dB tweeter and woofer controls
Gold plated spring loaded terminals
Aluminum electroplated glass fiber cones
3/4″ neodymium magnet dome tweeter with “On-Axis” 180° positioning for better staging and imaging
High roll surround / long excursion
Easy install “Turn-N-Lock™” mechanism
Easy connect spring loaded binding posts
Poly switch for tweeter protection
Hung butyl surround
250-Volt mylar caps
Elaborate filter network: High pass 12dB/Oct @ 2kHz
Low pass 12dB/Oct @ 2kHz

IQ CM6Dual In-Ceiling Speakers

Singles have +/- 3dB tweeter control
Duals have +/- 3dB tweeter and woofer controls
Gold plated spring loaded terminals
Aluminum electroplated glass fiber cones
3/4″ neodymium magnet dome tweeter with “On-Axis” 180° positioning for better staging and imaging
High roll surround / long excursion
Easy install “Turn-N-Lock™” mechanism
Easy connect spring loaded binding posts
Poly switch for tweeter protection
Hung butyl surround
250-Volt mylar caps
Elaborate filter network: High pass 12dB/Oct @ 2

Imãge-C25X In-Wall Speakers

1″ high definition swiveling silk dome tweeter with neodymium magnet
Switched ±3dB woofer level adjustment
Switched ±3dB tweeter level adjustment
Corrective phase plug
Long excursion woofers with poly injection cone and high grade voice coils
Easy-install “Turn-N-Lock™” mechanism
Elaborate filters network: High pass @ 3kHz, 18dB/Oct
Low pass @ 3kHz, 18dB/Oct
Paintable rust-proof aluminum grilles

Imãge-846X In-Wall Speaker

1″ swiveling silk dome neodymium tweeter
Elliptical 4 x 6″ glass fiber cone mid-range
8″ glass fiber cone woofer with corrective phase plug
Bass reflex design
Removable back box
Switched ±3dB woofer and tweeter level adjustment
Easy install Turn-N-Lock mechanisms
High temperature voice coil wire adhesives

Imãge CM800 Ceiling Mount Speakers

High sensitivity & power handling
Paintable rust-proof aluminum grilles for superior protection and job flexibility
Turn-N-Lock™ installation for safe, efficient and professional installs
PistonMax woofer design for more accurate mid-bass without distortion
Available in 3 different sizes: 5-1/4″, 6-1/2″ and 8″
Long life, moisture resistant material including butyl rubber surrounds and poly injection cones for safe use in kitchens, bathrooms ad atriums
Imãge style; easily integrates with the Imãge series in-wall, SweetSpot and IQ Series in-ceiling speakers
3/4″ neodymium magnet dome tweeters with “On-Axis” – 380° positioning for better staging and imaging
Long excursion bumped back plate and thick gauss magnet
Easy conect spring loaded binding posts
Poly switch for tweeter protection
Elaborate filter network: High pass 12dB/Oct @ 2kHz
Low pass 12dB/Oct @ 2kHz

Imãge CM600 Ceiling Mount Speakers

High sensitivity & power handling
Paintable rust-proof aluminum grilles for superior protection and job flexibility
Turn-N-Lock™ installation for safe, efficient and professional installs
PistonMax woofer design for more accurate mid-bass without distortion
Available in 3 different sizes: 5-1/4″, 6-1/2″ and 8″
Long life, moisture resistant material including butyl rubber surrounds and poly injection cones for safe use in kitchens, bathrooms ad atriums
Imãge style; easily integrates with the Imãge series in-wall, SweetSpot and IQ Series in-ceiling speakers
3/4″ neodymium magnet dome tweeters with “On-Axis” – 380° positioning for better staging and imaging
Long excursion bumped back plate and thick gauss magnet
Easy conect spring loaded binding posts
Poly switch for tweeter protection
Elaborate filter network: High pass 12dB/Oct @ 2kHz
Low pass 12dB/Oct @ 2kHz

Imãge 8″ In-Wall Speakers

1″ high definition swiveling silk dome tweeter with neodymium magnet
Switched ±3dB woofer level adjustment
Switched ±3dB tweeter level adjustment
Corrective phase plug
Long excursion woofers with poly injection cone and high grade voice coils
Easy-install “Turn-N-Lock™” mechanism
Elaborate filters network: High pass @ 3kHz, 18dB/Oct
Low pass @ 3kHz, 18dB/Oct
Paintable rust-proof aluminum grilles

Imãge 6″ In-Wall Speakers

1″ high definition swiveling silk dome tweeter with neodymium magnet
Switched ±3dB woofer level adjustment
Switched ±3dB tweeter level adjustment
Corrective phase plug
Long excursion woofers with poly injection cone and high grade voice coils
Easy-install “Turn-N-Lock™” mechanism
Elaborate filters network: High pass @ 3kHz, 18dB/Oct
Low pass @ 3kHz, 18dB/Oct
Paintable rust-proof aluminum grilles

EWS800 Edgeless In-Wall Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
+/- 3dB bass & treble controls
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

EWS600 Edgeless In-Wall Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
+/- 3dB bass & treble controls
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

EWS530C Edgeless In-Wall LCR Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
+/- 3dB bass & treble controls
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

ECS8D Edgeless In-Ceiling Dual VC Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
+/- 3dB bass & treble controls
Dipole/Bipole and DVC/Surround selectable switches
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

ECS8.0 Edgeless In-Ceiling Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
+/- 3dB bass & treble controls
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

ECS6D Edgeless In-Ceiling Dual VC Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
Dipole/Bipole and DVC/Surround selectable switches
+/- 3dB bass & treble controls
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

ECS6.5 Edgeless In-Ceiling Speaker

Frameless design for reduced visibility/seamless blend
Magnetically attached, versatile, paintable grilles (comes standard with round grilles. Square grilles are available & sold separately)
1″ (25mm) silk dome NEO swiveling tweeters
Low mass stiff Kevlar cone bodies for a smooth, accurate & detailed output
+/- 3dB bass & treble controls
12dB/Octave with polyswitch protection
Gold plated spring loaded terminals
Easy install “Turn-N-Lock™” mechanism

Imãge 5″ In-Wall Speakers

The Imãge line of in-wall and in-ceiling speaker systems is the recipient of numerous design and engineering awards since its conception, including the prestigious “1998 CEMA Design and Engineering Excellence Award” and the “2000 Design and Engineering Showcase Award,” just to name a few.